Products

Programmable logic controller Panasonic FP0R

Due to its extremely compact design, the FP0R is particularly suited for small switching cabinets and other locations with limited space. Up to four axes can be positioned without an expansion unit, and the USB TOOL port ensures simple and fast transfer of programs.

FP0R - same ultra compact size as FP0 - W25 x H90 x D60mm. You can connect up to 3 FP0 expansion units to the FP0R, yielding up to 128 I/O points at a total width of just 100mm!

FP0R - fully compatible with FP0 units - FP0R control units are the same size and color, and have the same pin assignment and wiring as the FP0 control units. The FP0R can use existing FP0 programs without needing to change them, making replacement as simple as „plug and play”. Of course, the FP0R can use all FP0 expansion units.

• Ultra high-speed processing enhances productivity - an ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step there after
• Large programming capacity - 16k or 32k steps
• Generous data register - up to 12k or 32k words
• Independent comment memory
• USB2.0 port provides high-speed program transfer
• The new F-type FP0R provides maintenance-free and complete backup of all data without requiring a battery.
• Highly advanced, built-in positioning functions:

1. Jog operation
2. Individual settings for acceleration and deceleration for ramp functions
3. Target speed can be changed by an external signal input during jog operation or trapezoidal control
4. Can read encoder signals of up to 50kHz
5. 6-channel high-speed counters and 4-axis pulse outputs can be used simultaneously

• FP0R units provide various kinds of networking communication using a built-in interface or expansion units:

1. Ethernet (Modbus TCP/IEC60870)
2. Profibus
3. CC-Link
4. MEWNET-W0
5. C-NET
6. RS232C or RS485 serial communication

Control units with relay output

• AFP0RC10RS, input 6, relay output 4
• AFP0RC10CRS, input 6, relay output 4, with RS232C
• AFP0RC10MRS, input 6, relay output 4 , with RS485
• AFP0RC14RS, input 8, relay output 6
• AFP0RC14CRS, input 8, relay output 6, with RS232C
• AFP0RC14MRS, input 8, output 6, with RS485

Control units with transistor output

• AFP0RC16T, input 8, NPN output 8
• AFP0RC16CT, input 8, NPN output 8, with RS232C
• AFP0RC16MT, input 8, NPN output 8, with RS485
• AFP0RC16P, input 8, PNP output 8
• AFP0RC16CP, input 8, PNP output 8, with RS232C
• AFP0RC16MP, input 8, PNPoutput 8, with RS485
• AFP0RC32T, input 16, NPN output 16
• AFP0RC32CT, input 16, NPN output 16, with RS232C
• AFP0RC32MT, input 16, NPN output 16, with RS485
• AFP0RC32P, input 16, PNP output 16
• AFP0RC32CP, input 16, PNP output 16, with RS232C
• AFP0RC32MP, input 16, PNPoutput 16, with RS485

Control units T type

• AFP0RT32CT, input 16, NPN output 16, with RS232C, built-in battery
• AFP0RT32MT, input 16, NPN output 16, with RS485, built-in battery
• AFP0RT32CP, input 16, PNP output 16, with RS232C, built-in  battery
• AFP0RT32MP, input 16, PNP output 16, with RS485, built-in batter

Control units F type

• AFP0RF32CT, input 16, NPN output 16, with RS232C, battery-less data backup
• AFP0RF32MT, input 16, NPN output 16, with RS485, battery-less data backup
• AFP0RF32CP, input 16, PNP output 16, with RS232C, battery-less data backup
• AFP0RF32MP, input 16, PNP output 16, with RS485, battery-less data backup

Input only type

• FP0-E8X, input 8 points
• FP0-E16X, input 16 points

Relay output type

• FP0-E8RS, input 4 points, output 4 points
• FP0-E8YRS, output 8 points
• FP0-E16RS, input 8 points, output 8 points
• FP0-E32RS, input 16 points, output 16 points

Transistor output type

• FP0-E8YP, output 8 points PNP
• FP0-E8YT, output 8 points NPN
• FP0-E16YP, output 16 points PNP
• FP0-E16YT, output 16 points NPN

Transistor output type

• FP0-E16P, input 8 points, output 8 points PNP
• FP0-E16T, input 8 points, output 8 points NPN
• FP0-E32P, input 16 points, output 16 points PNP
• FP0-E32T, input 16 points, output 16 points NPN

RTD input unit- The new module determines temperatures with extreme precision and is easy to use. The temperature data obtained using the RTD (Resistance Temperature Detector) is converted to the digital value to be read by the FP0/FPS control unit.

• The module can be easily installed in an existing system.
• Multiple RTD types are allowed in one module, yielding a cost-effective solution.
• The temperature data measured can be converted to either degrees Celsius or degrees Fahrenheit inside the FP0 RTD unit.
• A broken RTD can be detected.

Available RTD types:
Pt100 (to IEC751), Pt1000 (to IEC751), Ni1000 (to DIN43760)

PROFIBUS - The FP0 DSP2 can operate either as a DP slave module or as a remote I/O system to which different decentralized inputs and outputs can be connected. A DIP switch can be used to switch between the two modes:
Mode 1: DP Slave module.
Mode 2: remote I/O.

MEWNET-F is remote I/O system with reduced wiring that connects PLCs and I/O slave stations via 2-core cabling. By adding an I/O link unit to the FP0, you can link a master station PLC and FP0 inputs and outputs via the network.

S-Link CPU - FP0 connects directly to the S-LINK for reduced wiring and simple installation. It can control up to 128 points for S-LINK-related devices. Similar to other FP0 units, up to three expansion units can be used for efficient I/O wiring.

CC-Link Slave Unit FP0-CCLS – it was developed for the open standard network CC-Link. By connecting this module to FP0R, FP0 or FP-X, data can be exchanged quickly between Panasonic PLCs and external devices.

Relay output terminal FP0-RT8Y-6А - The FP0-RT8Y-6A unit provides reliable insulation between peripheral equipment and the PLC system, even for electrical loads up to 250VAC/6A. Standardized MIL connectors establish a direct connection to the FP0R or FP0 unit.

The FP-PS24 high-end power supply units - also for arduous application conditions (24W, 60W and 120W)

• Up to 91.5% efficiency (FP-PS24-060E)
• Current limiting and short-circuit protection
• High power density with minimal loss
• Wide ambient temperature range from -10°C to +70°C, without performance loss
• Safety Standards Approved (IEC60950, UL60950,CSA22.2-60950, EN60950) tested by CSA
• Protection class II, without grounding
• Easy mounting and wiring
• Extremely compact with optimal air cooling